User Guide


The internal battery needs to be charged before use.

  1. Connect the camera to your computer using the provided USB cable

    • The power lamp is lit in red when charging starts.
    • The power lamp is unlit when charging is done.
  2. Remove the USB cable after charging is done


  • If the power lamp flashes in red, remove the USB cable and stop charging.
  • Use the provided USB cable for charging.
  • Connect directly to a USB port on your computer. Do not connect via a USB hub. It may not be possible to charge via some USB hubs.
  • When charging, be sure to insert and remove the USB cable while the computer is turned on. If the computer is restarted while the USB cable is inserted, the computer may not recognize the camera.

Charging Time

The camera is charged in approximately 180 minutes (at 25°C).


  • The time above is a guide for full charging. The charging time differs according to the remaining battery capacity.
  • If the battery capacity is low, it may take a while for the camera to be recognized by the computer.
▲ Back to Top