RICOH THETA V

Quick Reference Guide

Setting

Preparation

STEP1

Charging the camera

Connect the camera to your computer using the provided USB cable to charge it. The power lamp lights green during charging and goes out when the camera is fully recharged. (The lamp flashes in green when the remaining battery level is low.)

* The camera is charged in approx. 200 minutes (at 25°C (77°F)).
* When the remaining battery level is low, it may take a while for the camera to be recognized by the computer.

STEP2

Installing computer application "RICOH THETA"

1. Download the app suitable for your computer.

2. Double click the file downloaded and install it following the on-screen instructions. When a screen as shown in the diagram below appears, the installation is complete.

STEP3

Checking the camera firmware version

1. Start computer app"RICOH THETA".
2. Select [File] → [Firmware Update] in the menu.
3. Follow the instructions on the screen to connect the camera to your computer using the provided USB cable.
* Internet connection of the computer is necessary. 4. Click [OK] and Check the firmware version.
* If the firmware isn't the latest version, update it according to the message. 5. After checking the firmware version, click [OK] and disconnect the USB cable.

STEP4

Installing smartphone app "RICOH THETA S"

1. Access a site to download smartphone apps and search for "RICOH THETA S" Or install the app from the link below.

2. After installing, the icon as shown in the figure will be added.

Connecting/Setting

STEP1

Starting the camera

1. Press and hold the power button. Camera status lamp flashes in blue slowly during startup.
2. When the camera is ready for use, the Camera status lamp lights in blue.

STEP2

Connecting the camera to a smartphone

1. Press the wireless button. The wireless lamp flahes in blue.
2. Display the Wi-Fi™ settings of the smartphone.
3. Check the serial number printed at the bottom of the camera.
* The serial number printed at the bottom of the camera is the same as the SSID and password. 4. Select "THETA*******.OSC" from the network list and enter the password.
* "*********" of SSID part is indicated by (B).
* The password is indicated by (A).
5. When the wireless lamp lights in blue, the camera is connected to the smartphone.

STEP3

Starting the smartphone app "RICOH THETA S"

1. Start "RICOH THETA S" app on the smartphone.
2. Tap "Cam imagpes" on the bottom left of the screen.

STEP4

Checking and changing the camera settings

Tap [Settings]. Change [Change Wi-Fi password]/[Sleep mode]/[Camera shutter volume]/Transfer method].

* The date and time of the camera are synchronaized wih the smartphone when the cmaera is connected to the smartphone and "RICOH THETA S" of smartphone app is started.
* "Wi-Fi Password", "Sleep mode" and "Camera shutter volume" can be set only when the camera is connected to the smartphone.